Respiratory Protection,OptimAir,SCBA

OptimAir 6A PAPR with OptiFilter Cartridges

The OptimAir 6A powered air-purifying respirator (PAPR) can be used with an entire family of filters, chemical cartridges and combination cartridges for protection against particulates, toxic gases and vapors or a combination of these hazards. Requiring two filters, the unit is available with full- or half-mask facepiece, or hood. The belt-mounted motor/blower assembly includes an efficient 4.6 volt motor which has a long service life. The motor/blower assembly features threaded connectors for quick and easy attachment of OptiFilter cartridges.

The OptimAir 6A powered air-purifying respirator (PAPR) provides respiratory protection by filtering contaminants from ambient air and providing air flow to either a facepiece or hood (with HEPA filters only) at a rate equal to or exceeding National Institute for Occupational Safety and Health (NIOSH) standards.

The OptimAir 6A powered air-purifying respirator (PAPR) with Ultravue, Comfo, Comfo Elite, or Comfo Welder's facepieces or Tyvek hood has approvals from the National Institute for Occupational Safety and Health (NIOSH) and the Mine Safety and Health Administration (MSHA). Filters and cartridges are covered by separate approval. Cartridges must be replaced whenever air flow drops below four cubic feet per minute (115 lpm) with tight-fitting facepieces, six cubic feet per minute (170 lpm) with the Tyvek hood or when the user smells or tastes the contaminant.

SM494236 - OptimAir6A - Medium Hycar Facepiece,battery,belt and battery charger - $800.00

SM486485 - Replacement Tyvek Hood and Simple Hood Suspension - $76.00

SM491120 - Battery Pack - $284.00

NEW ! OptimAir® TL Powered Respirator
		OptimAir® TL Powered Respirator Principles of Operation A battery operated blower brings air through the cartridge, up the breathing tube and into the wearer's respirator inlet covering. Approvals & Standards NIOSH-APPROVED A variety of hood materials, styles and configurations are all NIOSH-approved, including DuPont Tychem SL and QC with single and double bib. A choice of hose connection is also available. Unit has an APF of 1,000 (Assigned Protection Factor). Applications Asbestos, Mold & Lead Paint Abatement Chemical Hazardous Materials Pharmaceutical Hazards Particulate and Dust Toxic Atmosphere Non-IDLH Product Information MSA's OptimAir TL PAPR incorporates a sleek, low-profile design for user comfort never before offered in a PAPR. All components, including the motor blower, cartridges, and battery, are packaged in a single hip-hugging housing. Improved motor blower electronics allow for optimum air flow, while the compact and ergonomic battery pack affords lightweight comfort and fit. Flow control sensors are activated by insertion of the cartridges and breathing hose to the blower housing. The unit automatically adjusts for altitude via an internal pressure sensor. Superior design features permit fast, accurate changeout of cartridges, hoods and batteries. Slim, curved PAPR housing helps to minimize fatigue and permits work in tight confined areas. Standard OptimAir TL PAPR kit includes motor blower, smart charger, standard battery, hose and decon belt. DESIGN FEATURES • Crushproof breathing tube • Automatic setting of flow rates • Audible and visual alarms for low flow indication and low battery voltage • Less bulk and better weight distribution improves worker efficiency • Sealing gaskets on each cartridge
		SM10081116 - OptimAir TL - OptimAir Kit for hoods,standard battery- $861.11 SM10083329 - Tychem QC hood,single bib,threaded connector, w/suspension (4 pack) - $222.22 SM10083381 -Tychem SL Hood,single bib,threaded connector,w/suspension (4 pack) - $292.83

OptimAir

Well suited for abatement, nuclear, and other industries with hazardous particulate environments. The water-resistant filter has an optional prefilter and cover. Complete units include motor/blower, nickel metal hydride (NiMH) battery, dual-rate charger, one Type HE OptiFilter XL cartridge, belt and choice of Ultravue, Ultra Elite facepiece or Advantage 3000. The low-profile NiMH battery pack is lightweight (12.5 oz.), fits close to the body, and is small enough to fit in most pockets. The battery provides eight hours of continuous use, lasting a full work shift. NiMH batteries do not have a "memory effect" like NiCd batteries. The sealed, water-resistant battery pack is designed for easy shower decontamination. The dual-rate smart charger is a standard accessory with this unit. The charger can recharge a battery in less than three hours. An LED indicates battery condition.

The respirator filters particulates and provides a constant flow of respirable air directly to the Advantage 3000 Ultravue® or Ultra Elite® facepiece. Because it does not have a breathing tube, the unit is more compact than other powered air-purifying respirators (PAPRs), enhancing user maneuverability and simplifying decontamination.

Meets National Institute for Occupational Safety and Health (NIOSH) approval TC-21C-0758.

North SCBA
		SCBA with 60 Minute High Pressure, 4500 psi, Aluminum/Full Wrapped Cylinder (80032) with Kevlar/Nomex/PBI Harness and Carry Case. Sizes: Small & Medium/Large.
		SN821K - SCBA with 60 minute High Pressure 4500psi, AluminumFull wrapped cylinder with Kevlar/Nomex/PBI Harness and carry case - Size: Small - $3785.00 SN821K - SCBA with 60 minute High Pressure 4500psi, AluminumFull wrapped cylinder with Kevlar/Nomex/PBI Harness and carry case - Size: Medium - $3785.00 SN821K - SCBA with 60 minute High Pressure 4500psi, AluminumFull wrapped cylinder with Kevlar/Nomex/PBI Harness and carry case - Size: Large - $3785.00 SN822K - SCBA with Low Pressure Cylinder - Size: Small - $2682.05 SN822K - SCBA with Low Pressure Cylinder - Size: Medium - $2682.05 SN822K - SCBA with Low Pressure Cylinder - Size: Large - $2682.05

North Frontier SCBA

The North Frontier SCBA is designed for industrial use, including confined spaces and other Immediately Dangerous to Life or Health (IDLH) environments.
There are several features that distinguish the North Frontier™ SCBA from other brands.
• Available with facepiece or hood. The majority of brands are only available with a facepiece. The North Frontier™ SCBA is available with either a tight fitting facepiece or a hood.
• Smallest demand valve available: The Compact Demand Valve (CDV) is extremely lightweight and low profile.
• Simple, easy to use. The North Frontier™ SCBA is specifically designed to be as lightweight as easy to use as possible. Most industrial users of SCBAs do not need many of the features that are required on NFPA SCBAs. These “extras” are often included as standard features on many brands of industrial SCBAs, adding to the cost and complexity of these units.

comparision

SN91300S - Frontier Series SCBA with facepiece - Size Small - $1287.00

SN91300 - Frontier Series SCBA with Facepiece - Size Medium/Large - $1287.00

SN91500S - North Frontier SCBA with PVC Hood - Size: Small - $1397.00

SN91500 - North Frontier SCBA with PVC Hood - Size: Medium/Large - $1397.00

OptimAir 6A PAPR with OptiFilter Cartridges

NEW ! OptimAir® TL Powered Respirator

OptimAir

North SCBA

North Frontier SCBA

Safety Supplies @ R.J. Safety Supply

Respiratory Page: Previous | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | Next

Industry Links