Flow Test Kit for Constant Flow Supplied Air Respirators
CFM tester checks the volume of air that gets to the respirator. A flow meter simply quick connects onto an airline hose to check the respirator system for NIOSH compliant air flows. The kit contains flow meter and a full assortment of quick connect plugs and adapters to fit all respirator manufacturer's airline hoses. Excellent for use with ambient air pumps. NOTE: NIOSH mandates 4 CFM for tight-fitting masks and 6 CFM for hoods.
Remote CO Monitor
Attached to any air source or filter panel, the Remote CO Monitor alerts workers using supplied air respirators when the level of carbon monoxide has exceeded 10 ppm (5ppm Canada). The CO monitor can be operated in AC or DC mode and uses a single 9-volt alkaline battery. Maximum regulator inlet pressure is 150 psi. Comes with coupling pigtail.
Remote CO Alarm
The Remote CO Alarm System uses a 50' cable to go with workers into the work area and effectively warn of the presence of carbon monoxide in the air source with a 90 decibel alarm, and in very noisy environments, a flashing strobe light. The system is housed in a rugged Pelican carry case or may be wall mounted, and attached to any Allegro Air Filtration Panel.
Point of Attachement Air Control System
This Point-of-Attachment (POA) Air Control System connects to any breathing air source. It’s housed in a Pelican carry case that can be wall-mounted and includes an adjustable pressure regulator, pressure gauge and a pressure relief valve. This POA system meets NIOSH requirements for point of attachment. Maximum regulator inlet pressure is 150 psi.
