 |
MF 1000 Tac-Fire CREE Flashlight
Description |
Waterproof and Impact Resistant flashlight with machined Aluminum Housing. Extremely Powerful with low and high power modes. Meets NFPA Fire Resistant Requirements--500°F (260°C) for 30 minutes. |
| |
| Specifications |
Light Emissions
- 1,130 Lumens
- 8° Focused Beam
- CRI: 80%
- Distance Vision: 600 ft (183 m)
Features
- 9 White CREE XR-E LEDs
- Tap Switch (rear of light)
- Shoulder Strap
Modes
- 2 Modes:
- Mode 1: 33% Intensity
- Mode 2: 100% Intensity
* Light turns Off between Modes
Durability
- Fire Resistant
- Waterproof to 20 ft (6 m)
- Impact Resistant
Physical Characteristics
- 3.8 lbs (1.7 kg)
- Size:
- Length: 11.1" (282 mm)
- Diameter (head): 3.9 " (99 mm)
- Diameter (handle): 1.9" (48 mm)
- 6061-T6 Aluminum Housing with TPR Bumpers; Polycarbonate Shield
Battery
- 15 CR123 (Batteries Included)
- A Lithium Ion Rechargeable Battery System is also available (accessory)
- RCR123s can be used in the MF 1000 Tac-Fire CREE.
- Use 4 RCR123s and a dummy cell in each of the three stacks. Therefore, 12 RCR123s and 3 dummy cells would be required.
- NOTE: Make sure you purchase RCR123 batteries with “protection circuitry” so that they can be installed in series.
- Battery Life*:
- Full Power: 4 to 6 hours (varies by mode)
- Emergency: up to 6 hours
- *Battery life will be dependent on the capacity of the charged battery
Warranty
|
|
|
|
| |
MF Tac-Fire CREE Rechargeable
Description |
Waterproof and Impact Resistant flashlight with machined Aluminum Housing. Extremely Powerful with low and high power modes. Meets NFPA Fire Resistant Requirements--500°F (260°C) for 30 minutes. |
| |
| Specifications |
Light Emissions
- 1,130 Lumens
- 8° Focused Beam
- CRI: 80%
- Distance Vision: 600 ft (183 m)
Features
- 9 White CREE XR-E LEDs
Lithium Ion Rechargeable Battery System
- Tap Switch (rear of light)
- Shoulder Strap
Modes
- 2 Modes:
- Mode 1: 33% Intensity
- Mode 2: 100% Intensity
* Light turns Off between Modes
Durability
- Fire Resistant
- Waterproof to 20 ft (6 m)
- Impact Resistant
Physical Characteristics
- 3.8 lbs (1.7 kg)
- Size:
- Length: 11.1" (282 mm)
- Diameter (head): 3.9 " (99 mm)
- Diameter (handle): 1.9" (48 mm)
- 6061-T6 Aluminum Housing with TPR Bumpers; Polycarbonate Shield
Battery
- Lithium Ion Rechargeable Battery System (included)
- Consists of Lithium Ion Rechargeable Batteries (12 RCR123), Battery Cap and A/C Adaptor
- Battery Life*:
- Full Power: 45 to 60 minutes of continuous use (varies by mode)
- Lithium Ion Battery System takes 4 hours to be charged fully
- *Battery life will be dependent on the capacity of the charged battery
Warranty
|
|
|
|
 |
MF 1000 Tac-Fire OSRAM OSTAR Flashlight
Description |
Waterproof and Impact Resistant flashlight with machined Aluminum Housing. Extremely Powerful with low and high power modes. Meets NFPA Fire Resistant Requirements--500°F (260°C) for 30 minutes |
| |
| Specifications |
Light Emissions
- 1,000 Lumens
- 18° Focused Beam
- CRI: 80%
- Distance Vision: 600 ft (183 m)
Features
- 3 White OSRAM OSTAR LEDs
- Tap Switch (rear of light)
- Shoulder Strap
Modes
- 2 Modes:
- Mode 1: 33% Intensity
- Mode 2: 100% Intensity
* Light turns Off between Modes
Durability
- Fire Resistant
- Waterproof to 20 ft (6 m)
- Impact Resistant
Physical Characteristics
- 3.8 lbs (1.7 kg)
- Size:
- Length: 11.1" (282 mm)
- Diameter (head): 3.9 " (99 mm)
- Diameter (handle): 1.9" (48 mm)
- 6061-T6 Aluminum Housing with TPR Bumpers; Polycarbonate Shield
Battery
- 15 CR123 (Batteries Included)
- RCR123s can be used in the MF 1000 Tac-Fire OSRAM.
- Use 4 RCR123s and a dummy cell in each of the three stacks. Therefore, 12 RCR123s and 3 dummy cells would be required.
- NOTE: Make sure you purchase RCR123 batteries with “protection circuitry” so that they can be installed in series.
- Life*:
- Full Power: 4 to 6 hours (varies by mode)
- Emergency: up to 6 hours
- *Battery life will be dependent on the capacity of the charged battery
Warranty
|
|
|
|
| |
MF Forensic Blue 470 nm ALS
Description |
Portable 470 nm Alternate Light Source to help identify Trace Evidence, Gun Shot Residue & Blood Spatter. Provides oblique lighting when set on floors, counters or similar surface.
Easy to maintain: no bulbs or filters to replace.
Used by Forensic and CSI personnel to Search for:
- Footwear and Other Impressions
- Trace Evidence (Hairs, Fibers, etc.)
- GSR (Gun Shot Residue)
- Blood Spatter
Use with Orange Goggles
Custom Built: Up to 6 Weeks for Delivery |
| |
| Specifications |
Light Emissions
- Power Consumption: 27 Watts
- 8° Focused Beam
- CRI: 80%
- Recommended Operational Distance: 20 ft (6 m)
Features
- 9 CREE XR-E LEDs
- Wavelength: 470 nm (Blue)
- Tap Switch (rear of light)
- Shoulder Strap
Modes
- 2 Modes:
- Mode 1: 33% Intensity
- Mode 2: 100% Intensity
* Light turns Off between Modes
Durability
- Fire Resistant
- Waterproof to 20 ft (6 m)
- Impact Resistant
Physical Characteristics
- 3.8 lbs (1.7 kg)
- Size:
- Length: 11.1" (282 mm)
- Diameter (head): 3.9 " (99 mm)
- Diameter (handle): 1.9" (48 mm)
- 6061-T6 Aluminum Housing with TPR Bumpers; Polycarbonate Shield
- Blue Exterior
Battery
- Lithium Ion Rechargeable Battery System (included)
- Consists of Lithium Ion Rechargeable Batteries (12 RCR123), Battery Cap and A/C Adaptor
- Life*:
- Full Power: 45 to 60 minutes of continuous use (varies by mode)
- Lithium Ion Battery System takes 4 hours to be charged fully
- *Battery life will be dependent on the capacity of the charged battery
Warranty
|
|
|
|
 |
MF Forensic Cyan 495 nm ALS
Description |
Portable 495 nm Alternate Light Source to view Latent Prints processed with Fluorescent Dyes and Powders. Provides oblique lighting when set on floors, counters or similar surface. Easy to maintain: no bulbs or filters to replace.
Used by Forensic and CSI personnel to Search for Evidentiary latent prints (fingerprints). Use while applying fluorescent powders to visualize latents as they are processed.
Use with Orange Goggles
Custom Built: Up to 6 Weeks for Delivery |
| |
| Specifications |
Light Emissions
- Power Consumption: 27 Watts
- 8° Focused Beam
- CRI: 80%
- Recommended Operational Distance: 20 ft (6 m)
Features
- 9 CREE XR-E LEDs
- Wavelength: 495 nm (Cyan)
- Tap Switch (rear of light)
- Shoulder Strap
Modes
- 2 Modes:
- Mode 1: 33% Intensity
- Mode 2: 100% Intensity
* Light turns Off between Modes
Durability
- Fire Resistant
- Waterproof to 20 ft (6 m)
- Impact Resistant
Physical Characteristics
- 3.8 lbs (1.7 kg)
- Size:
- Length: 11.1" (282 mm)
- Diameter (head): 3.9 " (99 mm)
- Diameter (handle): 1.9" (48 mm)
- 6061-T6 Aluminum Housing with TPR Bumpers; Polycarbonate Shield
- Green Exterior
Battery
- Lithium Ion Rechargeable Battery System (included)
- Consists of Lithium Ion Rechargeable Batteries (12 RCR123), Battery Cap and A/C Adaptor
- Life*:
- Full Power: 45 to 60 minutes of continuous use (varies by mode)
- Lithium Ion Battery System takes 4 hours to be charged fully
- *Battery life will be dependent on the capacity of the charged battery
Warranty
|
|
|
|
 |
MF Forensic Green 525 nm ALS
Description |
Portable 525 nm Alternate Light Source to view Latent Prints processed with Fluorescent Dyes and Powders. Provides oblique lighting when set on floors, counters or similar surface. Easy to maintain: no bulbs or filters to replace.
Used by Forensic and CSI personnel to search for evidentiary latent prints (fingerprints). Use while applying fluorescent powders to visualize latents as they are processed.
Use with Orange Goggles
Custom Built: Up to 6 Weeks for Delivery |
| |
| Specifications |
Light Emissions
- Power Consumption: 27 Watts
- 8° Focused Beam
- CRI: 80%
- Recommended Operational Distance: 20 ft (6 m)
Features
- 9 CREE XR-E LEDs
- Wavelength: 525 nm (Green)
- Tap Switch (rear of light)
- Shoulder Strap
Modes
- 2 Modes:
- Mode 1: 33% Intensity
- Mode 2: 100% Intensity
* Light turns Off between Modes
Durability
- Fire Resistant
- Waterproof to 20 ft (6 m)
- Impact Resistant
Physical Characteristics
- 3.8 lbs (1.7 kg)
- Size:
- Length: 11.1" (282 mm)
- Diameter (head): 3.9 " (99 mm)
- Diameter (handle): 1.9" (48 mm)
- 6061-T6 Aluminum Housing with TPR Bumpers; Polycarbonate Shield
- Green Exterior
Battery
- Lithium Ion Rechargeable Battery System (included)
- Consists of Lithium Ion Rechargeable Batteries (12 RCR123), Battery Cap and A/C Adaptor
- Battery Life*:
- Full Power = 45 to 60 minutes of continuous use (varies by mode)
- Lithium Ion Battery System takes 4 hours to be charged fully
*Battery life will be dependent on the capacity of the charged battery
Warranty
|
|
|
|
 |
MF Forensic IR 850 nm
Description |
Infrared light meant for specialized needs including enhancing Night Vision Systems or for use with Cameras with Infrared Capabilities for Forensic applications.
Easy to maintain as there are no bulbs or filters to replace.
Custom Built: Up to 6 Weeks for Delivery |
| |
| Specifications |
Light Emissions
- Power Consumption: 27 Watts
- 18° Focused Beam
- CRI: 80%
- Distance Vision: Varies based on Surroundings
Features
- 3 OSRAM OSTAR LEDs
- Wavelength: 850 nm (Infrared)
- Tap Switch (rear of light)
- Shoulder Strap
Durability
- Fire Resistant
- Waterproof to 20 ft (6 m)
- Impact Resistant
Modes
- 2 Modes:
- Mode 1: 33% Intensity
- Mode 2: 100% Intensity
* Light turns Off between Modes
Physical Characteristics
- 3.8 lbs (1.7 kg)
- Size:
- Length: 11.1" (282 mm)
- Diameter (head): 3.9 " (99 mm)
- Diameter (handle): 1.9" (48 mm)
- 6061-T6 Aluminum Housing with TPR Bumpers; Polycarbonate Shield
Battery
- 15 CR123 (Batteries Included)
- RCR123s can be used in the MF 1000 InfrRed OSRAM.
- Use 4 RCR123s and a dummy cell in each of the three stacks. Therefore, 12 RCR123s and 3 dummy cells would be required.
- NOTE: Make sure you purchase RCR123 batteries with “protection circuitry” so that they can be installed in series.
- Battery Life*:
- Full Power: 4 to 6 hours (varies by mode)
- Emergency: up to 6 hours
- *Battery life will be dependent on the capacity of the charged battery
Warranty
|
|
|
|
 |
MF Forensic All-In-One ALS Flashlight
Description |
Portable 470 nm Alternate Light Source with 4 Wavelengths as well as White Light. Includes Blue, Cyan, Green, Infrared and White LEDs
- 470 nm - search for General Crime Scene Search (hairs, fibers, etc.), Blood, Gun Shot Residue (GSR) using Orange Goggles
- 495 nm - search for Latent Finger Prints processed with fluorescent dyes using Yellow Goggles
- 525 nm - search for Latent Finger Prints processed with fluorescent dyes using Yellow Goggles
- 850 nm - for use with Night Vision Systems or to search for bruising, bite marks, GSR and dried blood on dark clothing using a camera with Infrared (IR) Capability (like the Fuji IS-1 and IS Pro)
|
| |
| Specifications |
Light Emissions
- Power Consumption: 27 Watts
- 8° Focused Beam
- CRI: 80%
- Recommended Operational Distance: up to 6 to 14 ft (1.8 to 4.3 m)
Features
- 9 LEDs: 2 LEDs per wavelength + 1 White LED
- Wavelengths:
- 470 nm (Blue)
- 495 nm (Cyan)
- 525 nm (Green)
- 850 nm (IR)
- White LED
- Tap Switch (rear of light)
- Shoulder Strap
Durability
- Fire Resistant
- Waterproof to 20 ft (6 m)
- Impact Resistant
Modes
- 5 Modes in the following Progression:
- 470 nm (Blue)
- 495 nm (Cyan)
- 525 nm (Green)
- 850 nm (IR)
- White
* Light turns Off following White LEDs
Physical Characteristics
- 3.8 lbs (1.7 kg)
- Size:
- Length: 11.1" (282 mm)
- Diameter (head): 3.9 " (99 mm)
- Diameter (handle): 1.9" (48 mm)
- 6061-T6 Aluminum Housing with TPR Bumpers; Polycarbonate Shield
- Exterior Color: Green
Battery
Warranty
|
|
|
|
