Loading
 


Check Cart



You will receive an email confirmation when you subcribe

We never give out your email address - Unsubscibe is located at the bottom of each newsletter

 

Cal-Trans Certified

MBE

DGS

CCR Registered
Supplier Clearinghouse
Council for Supplier Diversity 

 

Industry Links

Our Manufacturers

Videos & Media

Fit Testing Procedure

Fall Protection Standards

Respiratory Protection Standards

Eye and Face Protection

Construction - Personal Protection
Equipment(PPE

Personal Protection Equipment
(PPE) Guidelines

 

Confined Space

 

Tent Heater


Tent Heater
 
Tent Heater
The lightweight Tent Heater offers the rugged, heavy duty design of all steel housing with enclosed heating elements and a sealed motor. This powerful heater will raise the temperature 50° in a work tent. It is UL listed, CSA approved, requires 110V AC, and offers 1500 watts of 5000 BTU with 115 CFM airflow. 12" x 8" x 12", 14 lbs.
.
 

CA9401-50 - Tent Heater - $504.67

 
 

Economy Work Tent


Economy Work Tent
Utility shelter springs from backpack into full size (6'1" x 6'w x 7'h) tent in seconds. Made from water-resistant, flame-retardant nylon with 360deg. reflective striping. Quick set-up from the inside or outside, with two floor-to-floor fiber poles for better stability and structural strength. One large door and two large windows offer easy access for worker and equipment, and open bottom allows for protection whil working over manhole covers or excavation sites. Comes in high-viz green, with twelve yellow 9" plastic stakes, and folds to 31"w x 2 1/2"h. Weight: 30lbs

CA9403-66 - Economy Work Tent - $341.00

 
 

Deluxe Work Tent


Deluxe Work Tent  
Deluxe Work Tent
Easy to use and very durable, the Deluxe Work Tent features quick set-up from the inside or outside with fiberglass rod frame. These frames are uniquely designed to not pull out or poke through the fabric. A handy attached roll-up flap provides compact storage, easy transport, and means no missing storage bag. Offered in three sizes, it is available in a one door design with zipper closure, or a two door design with one zipper and one roll-up door. The pitch roof style provides extra headroom, structural strength, and repels snow and water. Frame rods are bolted for increased stability and the unbreakable hinges are made of rolled steel. The free-standing structural stability is excellent in windy conditions. For safety, side panels are high-visiblity green, and the white color of the tent allows proper lighting for color matching. Included is a blower duct tube in the rear of the tent, and a covered window. Flame retardant.

CA9401-66 - 6'd x 6'w x 61/2'h - 1 Door - $893.00

CA9401-86 - 8'd x 6'w x 7 1/2' h - 1 Door - $1195.00

CA9401-88 8'd x 8'w x 7 1/2'h - 1 Door - $1245.00

CA9402-66 - 6'd x 6'w x 6 1/2'h - 2 Door - $1045.00

CA9402-86 - 8'd x 6'w x7 1/2'h - 2 Door - $1311.00

 
 

Economy Umbrella



Economy Umbrella  
 
Economy Umbrella
Using the same heavy-duty safety yellow vinyl as the Deluxe Umbrella, the Economy model uses a strong, pointed 84" two-part wood pole, is 68" in diameter and collapses to 4" x 6" in diameter.

CA9403-01 - Economy Umbrella - $210.00

 
 

Deluxe Umbrella

Deluxe Umbrella
 
 
Deluxe Umbrella
This 84" diameter umbrella offers low cost protection from sun and rain. It features heavy duty vinyl in safety yellow with a sturdy, 92" two-part metal pole that tilts for convenience. It can be pushed into the ground or strapped to the manhole guard rail. For easy storage, it collapses to 4" x 6" diameter.

CA9403 - Deluxe Umbrella - $293.00

 
 

Wilson Welding Umbrella


 
Wilson Welding Umbrella
Perfect for outdoor protection from sun and rain, Wilson’s welding umbrellas are made from water-resistant blue Rip-Stop™ vinyl or yellow duck material and are easy to move.Wilson’s heavy duty welding umbrellas are constructed of specially designed fabric to withstand the elements. Our products can take the heat or shade you from it!
Features Full 6 foot diameter umbrella with 6 support ribs Lightweight aluminum construction with 1 1/2” diameter aluminum pole, detachable pointed lower pole. Overall 7 foot height Built in tilt mechanism provides maximum sun shade Hanging loop Outstanding hardware Made in U.S.A. Available in 10 ounce rip stop blue vinyl or yellow duck material

EAL3019277 - Blue Wilson Welding Umbrella - $125.00

EAL3019286 - Yellow Wilson Welding Umbrella - $125.00

EAL3019281 - Green Wilson Welding Umbrella - $125.00

EAL3019282 - Red Wilson Welding Umbrella - $125.00

 
 

Umbrella Stand


Umbrella Stand  
 
Umbrella Stand
When the umbrella pole cannot be driven into the ground, this metal stand with four locking legs that offers stability and ensures against collapse. The legs fold up for compact storage and easy transport.

CA9403-05 - Umbrella Stand - $248.00

 
 

Manhole Guard Rail


Manhole Guard Rail  
 
Manhole Guard Rail
Designed to protect an area 33" x 33", this 42" high guard rail collapses to only 44" square x 4" for easy storage. Weighing 34 lbs., the strong, one inch tubular .078 gauge steel construction is powder-coated in safety yellow for a durable finish and high visibility. Simple one-piece construction offers easy, no-tools assembly. Rail locks open and two hooking chains provide protected entry and exit. For safety, the rail accommodates signs, flags or lights, and for convenience, it can be used with a guard rail tent, umbrellas or winch.

 

CA9401- Manhole Guard Rail - $259.00

 
 

Guard Rail Winch

Guard Rail Winch
Guard Rail Winch
Raising and lowering equipment into confined space can be impossible without this durable winch. Even with a 300 lb. capacity, it is lightweight and portable, allowing easy mounting on guard rails. The side pieces are constructed of high tensile, heavy gauge aluminum with a durable yellow finish that resists weather and wear. The winch bar is constructed of rugged high tensile steel tubing with a 3" drum for fast recovery. Two independent ratchet systems, and a double-disc automatic brake offer load control and security. The 1/2" x 35' Dura-Plex™ braided rope is strong and durable. Guard rail not included. WARNING: Not for use as a personal retrieval device.

CA9401-10 Guard Rail Winch - $1595.00

CA9401-36- 35' Winch Rope - $156.00

 

High Impact Polymer Manhole Shield

Polymer Manhole Shield
 
High Impact Polymer Manhole Shield
Constructed of rugged, lightweight Polyethylene with bright yellow material that resists fading. Will fit 27", 30" and 32" diameter manholes with an inflatable seal that ensures a watertight seal. Designed with 4-outrigger support gussets that stabilize the shield and is 12" tall to keep water and mud out of manhole as you work. Can be used with Allegro guard rail and shield retainers.

CA9401-12 - High Impact Polymer Manhole Shield - $218.00

 

Manhole Lid Lifter

Manhole Lid Lifter
Manhole Lid Lifter
The toughest manhole covers are easy to move with this one piece lifter. It features a long all-steel handle that provides the leverage necessary to lift the heaviest lids. For safe storage, the alloy steel hook recesses and locks into the pole. Rubber grips on the handle and foot prevent slips and cadmium-plating fights rust. 42" long, 9 lbs.

CA9401-20 - Manhole Lid lifter - $208.00

CA9401-36- 35' Winch Rope - $156.00

Confined Space Page: 1 | 2 | 3 | 4 | 5 | 6 | 7 | Next  

 

 

 

Home | Products | About Us | Privacy Policy | Terms | Contact Us | Industry Resources|Request for Quote Forms | ©2010 R.J. Safety Supply Co., Inc