Confined Space Accessories

Meeting OSHA's confined space warning requirements by reminding workers to follow proper confined space procedures, these high impact polycarbonate signs fit under the manhole cover. The clear material offers a view into the manhole, and ventilation holes allow air out, and water to drain in. Also allows use of instrument probes without removal. Available in two sizes. Custom sizes and signs are available with volume orders.

	Part No.	9400-24	24" Manhole Sign
	Part No.	9400-26	26" Manhole Sign

Manhole Guard Rail

Designed to protect an area 33" x 33", this 42" high guard rail collapses to only 44" square x 4" for easy storage. Weighing 34 lbs., the strong, one inch tubular .078 gauge steel construction is powder-coated in safety yellow for a durable finish and high visibility. Simple one-piece construction offers easy, no-tools assembly. Rail locks open and two hooking chains provide protected entry and exit. For safety, the rail accommodates signs, flags or lights, and for convenience, it can be used with a guard rail tent, umbrellas or winch.

Magnetic Manhole Lid Lifter

Lift heavy manhole lids alone. For quick, safe removal and replacement of manhole covers. Minimizes stress and strain on back and body. Collapsible for easy storage and transport. Can access uneven textured surface found on manhole covers with dual position lifting points to provide the power to break loose the most stubborn covers. Eliminates the use of pry bars. For safety the magnet must be in contact with manhole cover to be engaged. Moves covers up to 36”. Offered with Steel or Aluminum Dolly.

Part No.	9401-25	Steel Dolly and 300 lb. magnet (lift weight)
Part No.	9401-26	Steel Dolly and 600 lb. magnet (lift weight)
Part No.	9401-25A	Aluminum Dolly and 300 lb. magnet (lift weight)
Part No.	9401-26A	Aluminum Dolly and 600 lb. magnet (lift weight)
Part No.	9401-27	Steel Dolly
Part No.	9401-27A	Aluminum Dolly

CA9401-25 -Steel Dolly and 300 lb. magnet (lift weight) - $1014.28

CA9401-26 - Steel Dolly and 600 lb. magnet (lift weight) - $1164.28

CA9401-25A- Aluminum Dolly and 300 lb. magnet (lift weight) - $1228.57

CA9401-26A - Aluminum Dolly and 600 lb. magnet (lift weight) - $1342.85

CA9401-27 - Steel Dolly - $578.57

CA9401-27A - Aluminum Dolly - $792.85

Magnet

Offered in two strengths, the lifting magnet will lift manhole lids up to 300 lbs. The heavy duty magnet with lift manhole lids up to 600 lbs. Requires no special tools or power sources.

	Part No.	9401-28	300 lb. magnet (lift weight)
	Part No.	9401-28S	600

Storm Grate Lifting Adapter

Three hooks for easy lifting and moving rectangular storm grates.

Manhole Lid Lifter

The toughest manhole covers are easy to move with this one piece lifter. It features a long all-steel handle that provides the leverage necessary to lift the heaviest lids. For safe storage, the alloy steel hook recesses and locks into the pole. Rubber grips on the handle and foot prevent slips and cadmium-plating fights rust. 42" long, 9lbs

Guard Rail Winch

Raising and lowering equipment into confined space can be impossible without this durable winch. Even with a 300 lb. capacity, it is lightweight and portable, allowing easy mounting on guard rails. The side pieces are constructed of high tensile, heavy gauge aluminum with a durable yellow finish that resists weather and wear. The winch bar is constructed of rugged high tensile steel tubing with a 3" drum for fast recovery. Two independent ratchet systems, and a double-disc automatic brake offer load control and security. The 1/2" x 35' Dura-Plex™ braided rope is strong and durable. Guard rail not included. WARNING: Not for use as a personal retrieval device.

	Part No.	9401-10	Guard Rail Winch
	Part No.	9401-36	35' Winch Rope

High Impact Polymer Manhole Shield

Constructed of rugged, lightweight Polyethylene with bright yellow material that resists fading. Will fit 27", 30" and 32" diameter manholes with an inflatable seal that ensures a watertight seal. Designed with 4-outrigger support gussets that stabilize the shield and is 12" tall to keep water and mud out of manhole as you work. Can be used with Allegro gaurd rail and shield retainers.

Pump Discharge Hose

Features tough PVC material, collapsible design for compact storage and fire-hose quick-connec design. 50'x2"

DC Submersible Dewatering Pump

This Pump is a totally enclosed, submersible dewatering unit. Perfect for dewatering ditches, manholes and tasks at construction sites. Watertight o-ring seals keep pump’s internal parts completely dry. Can operate on any 12 volt truck or automobile battery. Battery clips on the power cord are included for easy connection to the battery. Delivers up to 43 gallons per minute (gpm) for rapid dewatering and instant prime. Low 30 AMP draw allows for an hour of operation without starting the engine. 1/3 hp, 12 volt DC 30 AMP motor, 30’ cord. Weighs 33 lbs.

AC Dewatering and Sludge Pumps

Excellent for pumping standing water containing sand, solids, leaves or debris at a maximum of 50 gallons per minute. Submersible to 39 feet and continuous running water level to 3 1/2". 1/2hp motor.

PUMP SPECIFICATIONS

Part
Number

9404-01

9404-02

9404-03

9404-04

9404-05

Model

Deluxe

Standard

Low
Water

Sludge

Submersible(Pictured)

Discharge
Bore
Inch

1.5

Motor
Output
HP

2/3

1/2

1/3

Phase

Single

Total Head*
(Max.)
Ft.

39 1/2

Capacity
(Max.)
Gal/Min

63 1/2

Rated
Current
Amps

11.5

5.4

5.1

Starting
Method

Capacitor

Weight

Length
of Cable
Ft.

Dimensions

Diameter

8 1/4

7 3/8

8 1/4

9 1/2

Height

16 3/4

13 3/8

19 1/4

C.W.L.*
Inch

3 7/8

3/4

3 1/2

Max Cable Length (including 32 ft.):
Deluxe: 110V-73 ft., 3c x 14AWG	Low Water: 110V-97 ft., 3c x 16AWG	*Total head - Maximum depth pump may be submerged.
Standard: 110V-97 ft., 3c x 16AWG	Sludge: 110V-102 ft., 3c x 16AWG	*C.W.L. - Continuous Running Water Level
	DC Submersible: 30 ft., 8AWG